• Arduino Pro Micro
Arduino Pro Micro Atmega32u4 5V/16MHz 370 / P Product Description: Analog Input: Pins 6 Dc Current For 3 3V Pin 3.3 Digital I O Pins 14 Weight 20gm Input Voltage: 3.3v DESCRIPTION The Micro is a microcontroller board based on the ATmega32U4, developed in conjunction with Adafruit. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. TECHNICAL SPECIFICATIONS ATmega32U4 Built in USB 2.0 Absolute maximum VCC: 6V Maximum current for chip: 200mA Maximum current per pin: 40mA Recommended current per pin: 20mA 8-bit Atmel AVR Flash Program Memory: 32kB EEPROM: 1kB Internal SRAM 2.5kB ADC: 10-bit PWM: 8bit High Speed PWM with programmable Resolution from 2-11 bits LEDS Power: Red RX: Yellow TX: Green SERIAL Use Serial for the USB connection Use Serial1 for the hardware serial connection POWER RAW: 6V-16V VCC: 5V at 500mA USB HID enabled VID: 0x1B4F PID: 0x9205 (boot loader); 0x9206 (sketch

Write a review

Note: HTML is not translated!
Bad           Good

Arduino Pro Micro

  • Product Code: Arduino pro micro
  • Availability: 9
  • ₦2,000.00